红外菲涅尔透镜的注射超声辅助成型优化

为了提升聚合物红外菲涅尔透镜的光学性能,以其表面微沟槽的成型质量为目标,提出了一种高效的注射超声辅助成型方法,并对工艺参数进行了综合质量优化。首先分析了超声振动对聚合物的加热和加压效应,设计了一套一模两腔的对比试验模具;接着以红外菲涅尔透镜的调制传递函数MTF和齿形平均高度h为优化质量目标,设计了四步骤的多目标优化流程,通过试验设计、基于BP神经网络的质量目标与注射工艺参数关系建模、基于NSGA-Ⅱ的多目标优化和试验验证进行工艺参数的综合优化。实验结果表明:该多目标优化流程具有很高的精度,MTF和h的平均预测误差MPE分别为4.16%和3.32%;注射超声辅助成型的菲涅尔透镜微沟槽具有更高的复制质量,其齿沟槽平均高度h增加了15.6%,且h值的波动量随着h值的增大而增大,MTF值受齿高h均匀性的影响大于齿高h对其的影响。     

工程建设标准客观优先度评价研究

在工程建设标准的制定和修订过程中，如何科学地确定编制顺序一直是困扰标准管理部门的难题，采用传统方式“按需制标”，具有盲目性、主观性，容易造成标准在制定和修订过程中的互相重复、滞后与矛盾。为了保证标准制定和修订工作的协调性，指导标准体系中各标准的制修订顺序，引入复杂网络拓扑结构，将同一标准类型下的标准构成功能团，根据相互之间的关系形成复杂网络，采用剥落算法对其网络节点重要性排序，进而确定标准制修订的优先度。通过对建筑给水排水工程规范标准修订的实证分析，总结工程建设标准的网络拓扑优先度评价的算法模型，实现制定和修订顺序的自动计算，从而更加科学地指导标准的制定和修订工作     

Supply chain network design under the risk of uncertain disruptions

Facility disruptions in the supply chain often lead to catastrophic consequences, although they occur rarely. The low frequency and non-repeatability of disruptive events also make it impossible to estimate the disruption probability accurately. Therefore, we construct an uncertain programming model to design the three-echelon supply chain network with the disruption risk, in which disruptions are considered as uncertain events. Under the constraint of satisfying customer demands, the model optimises the selection of retailers with uncertain disruptions and the assignment of customers and retailers, in order to minimise the expected total cost of network design. In addition, we simplify the proposed model by analysing its properties and further linearise the simplified model. A Lagrangian relaxation algorithm for the linearised model and a genetic algorithm for the simplified model are developed to solve medium-scale problems and large-scale problems, respectively. Finally, we illustrate the effectiveness of proposed models and algorithms through several numerical examples.     

基于自适应阈值活动语音检测和最小均方误差对数谱幅度估计的低信噪比降噪算法

针对低信噪比(SNR)环境下传统方法对声信号降噪的局限性，提出了一种联合自适应阈值活动语音检测（VAD）算法和最小均方误差对数谱幅度估计（MMSE-LSA）的实时降噪算法。首先，在VAD算法中通过基于能量概率最大值的概率统计来对背景噪声进行估计，对得到的背景噪声进行实时更新并保存；然后，将实时更新的背景噪声作为MMSE-LSA的参考噪声，并对噪声幅度谱进行自适应更新，最后进行降噪处理。通过在真实场景中对四类声信号进行实验，结果表明，该算法在保证对低SNR声信号的实时处理的情况下，相较于传统MMSE-LSA算法，降噪信号的SNR能够提高10~15 dB，且不存在信号过减的情况，可应用于实际工程。     

双离心机法线加速度计动态校准中三参数余弦算法实现及应用

在双离心机的线加速度计动态校准中,三参数余弦算法贯穿在幅频特性、相频特性以及幅值线性度的整个测试中。本文详细描述了三参数余弦算法的概念和推导过程,以及在双离心机线加速度计动态校准数据处理过程中三参数余弦算法的程序实现;介绍了在幅频特性和相频特性中关于采集点的选取方式,降低由于采集点选择方式不同对数据拟合精度造成的影响。选取某型线加速度计为例,利用双离心机进行动态校准,对采集得到的数据点进行曲线拟合并得到测试结果,验证了所编写的三参数余弦算法程序的可行性。     

Shape optimization of bi-directional flow passage components based on a genetic algorithm and computational fluid dynamics

The inlet/outlet is an important part of a water conveyance system in a pumped storage power station (PSPS). Its hydraulic characteristics are directly related to the operation and economic benefit of the PSPS. Frequent changes between inflow and outflow operations pose significant challenges in the design of the inlet/outlet diffusion segment shape. In this study, an effective optimization method, including three-dimensional parametric modelling, computational fluid dynamics and a genetic algorithm, is introduced and coupled to the design of the diffusion segment shape. The hydraulic characteristics of bi-directional flow, including the head loss, velocity uneven distribution and uneven discharge distribution, are selected as the objective function in the optimization method. Using this method, the recommended shape of the inlet/outlet is studied and its hydraulic characteristics are discussed. The results indicate that the optimized inlet/outlet has better performance.     

基于大数据分析的分布式MOLAP技术研究

在计算机系统运行以及研究环节中,会存在大量的规模效应,此类状况难以避免,要想有效解决此类问题,就需要利用分布式的处理方式,开展对文件系统的分析。文章对分布式多维联机分析过程(MOLAP)的数据模型进行了分析,从维编码的算法、映射归约(MapReduce)算法的实现、分析维的遍历算法等方面作深入探讨。     

Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.     

一种下肢运动意图识别算法性能实时测评系统* .txt

摘要：对腿部运动意图识别算法的实时性能进行综合可靠的评价是实现下肢假肢灵活稳定控制的前提。提出一种逐层分级的基于下肢运动意图识别算法的实时测评方法，对算法的可靠性、稳定性以及运动意图识别速度进行综合评价。利用开发的运动意图识别算法评测系统，对基于肌电信号源和机械信号源的两种运动意图识别算法进行了实时性能测试，发现肌电信号源的算法识别时间大于机械信号源算法，但是其算法稳定性优于机械信号源算法。进一步地，还利用该评测系统有效地区分出正常识别策略与异常识别策略，发现正常策略的动作识别稳定系数比异常策略高25%左右。因此，所提的基于下肢运动意图识别算法的实时测评方法，能够对不同信号源算法以及不同识别策略的实时性能进行有效评价，为智能下肢假肢控制系统开发提供可供参考的测试平台。 .txt     

Optimal design of Raman fibre amplifier based on terminal value optimization strategy and shuffled frog leaping algorithm

This paper introduces an evolutionary algorithm, Shuffled Frog Leaping Algorithm (SFLA), to solve the optimization problem in designing the multi-pumped Raman Fibre Amplifier (RFA). SFLA is a powerful optimizer tool because of its efficient mathematical expressions and global search capability. We utilize SFLA to determine the optimal pump wavelengths and pump powers by minimizing the gain ripple of RFA. To accelerate calculations, a terminal value optimization strategy (TVOS) is incorporated into the evolution of SFLA. This proposed strategy takes the terminal power values of pumps as the decision variables in optimization. Then, the optimal original power values of the pumps are obtained by solving the Power Coupled Equations once, without using the traditional method of repetitive guesses.The combination of SFLA and TVOS enhances the efficiency of optimization and accelerates calculation, while satisfying the design requirements of RFA.The simulation results show that nearly 65% of computational time has been saved compared with the traditional average power analysis. The 4-pumped C+L band of backward multi-pumped RFA with the average net gain of 0 dB, 1 dB and 2 dB are designed individually, where the gain ripple is less than 0.64 dB. The combination of SFLA and TVOS enhance the optimization efficiency and improve the performance of RFA with good gain profile.